明升体育在线

Certified to National Health Foundation (NSF) Standard 61

STRESS SAVER® XP uses high-performance fluoroelastomer, which has the same structure as other products in the STRESS SAVER series, with a raised die-cast seal ring. In addition, STRESS SAVER XP is certified by the National Health Foundation (NSF) Standard 61 (for use in drinking water systems) and the Lubrizol System Compatibility Certification (for CORZAN® (CPVC Chlorinated Polyvinyl Chloride) Pipes use).

Features / Benefits
  • Reduced sealing surface area of protruding moulded seal rings by 75% and excellent sealing performance in non-metallic flanges +
  • Lower compression stress than bulk or special PTFE gaskets; ideal for non-metallic flanges
  • High-performance fluorine rubber can resist various chemicals
  • Better performance than PTFE coated gaskets
  • Unlike traditional PTFE-coated gaskets (which will fail after filler erosion), they will not fail
  • Seals in flat flanges with low compression stress
  • Avoid bending the cladding during installation
  • Better performance than standard fluorine rubber
  • Better resistance to caustic chemicals
  • Suitable for steam conditions
  • Higher heat resistance
+ It is highly recommended to use a full-face flange.
specification
  • Minimum temperature: -15 ° F / -26 ° C
  • Maximum temperature: 400 ° F / 204 ° C
  • Maximum pressure: 250 PSI / 17 bar
  • PxT ⅛: 50,000 (° F x PSIG) 1,717 ° C x bar)
application
  • water
  • steam
  • Most hydrocarbons
  • gas
  • Solvent
  • acid
  • Gasohol
Ranch