明升体育在线

Valves for aseptic processes

These valves are used in applications in the pharmaceutical and food industries that require aseptic processes to be maintained without the need for expensive overhauls and component replacement. This valve is externally sterilizable. This design sterilizes all dead corners of steam valves, including sterilization of valve discs, valve linings and seals without contacting the process medium.

Features / Benefits
  • Safe and pollution-free
  • Safe and non-corrosive
  • Valve body is safe and will not overpressure
  • Ensure safety through standardization
  • Safe and leak-free
  • Labeling for safety
specification
size
  • 2 ”to 16” /5.08 cm to 40.64 cm
Flange connection
  • ASME B16.5 Class 150 lbs (Design RF / FF)
  • EN 1092 PN 10/16 (Design A / B) (available on request)
Face to face size
  • ISO 5752 Table 5 Short
  • ASME B16.10: 2 ”to 12” /5.08 cm to 30.48 cm table narrow; 14 ”to 24” /35.56 cm to 60.96 cm table width
  • DIN EN 558-1 GR 20
  • MSS-SP 67: 2 ”to 12” /5.08 cm to 30.48 cm table narrow; 14 ”to 24” /35.56 cm to 60.96 cm table width
  • API 609: 2 ”to 12” /5.08 cm to 30.48 cm Class A; 14 ”to 24” /35.56 cm to 60.96 cm Class B
Body length
  • DIN / EN 12516 T2 (DIN 3840)
  • Tested within the scope of the inspection subject specified by module H1
Working pressure
  • 145 psi / 10 bar (depending on operating temperature)
test
  • EN 12266 P10
  • EN 12266 P11
  • EN 12266 P12 Leak rate A
main body
  • Water and lug design with long insulation neck
Degree of vacuum
  • Up to 1 mbar abs. (Depending on size and temperature)
temperature range
  • -40 ° F / -40 ° C to 338 ° F / 170 ° C, depending on material
Head flange
  • EN ISO 5211
  • NF E 29-402
Lined
  • PTFE

Resources

Ranch